English 
Français 
Español 
Deutsch 
Italiano 
Português 
Forum
43 posts
Posts by hishand studio
toto@k22 said 
Find a large block of text somewhere on the internet, perhaps a paragraph or two, and then apply your font to that block of text. If your font has spacing and kerning problem, you will likely find it there.
BTW HypoTypo used Lincoln's Gettysburg Address to show a preview of his font. You can also do that. You can even use your original post for that.
BTW HypoTypo used Lincoln's Gettysburg Address to show a preview of his font. You can also do that. You can even use your original post for that.
Hi thank you for the advice. I did what you told and stll i dont find the kerning issue. I guess it is on spacing issue? i am not really sure but maybe i will try to fix that and resubmit it.
Dear Dafon team, I just upload new font called Saned a week ago and today I receive email my font was rejected due to Spacing or kerning problem. I have already double checked the kerning and don't find the issue you mentioned. If you dont mind could you tell me exactly where the Spacing or kerning problem is? Thank you.
Rodolphe said
Ok done, that was a misunderstanding on our side, sorry :/
Press CTRL+F5 to make a hard refresh of the preview... https://www.dafont.com/el-molaco.font
Press CTRL+F5 to make a hard refresh of the preview... https://www.dafont.com/el-molaco.font
no worries, thank you for your help!
claudeserieux said
i already provide the glyph for correct complete font preview similiar as the image preview. the glyph name is noname. please kindly check, thank you.
Hi could you change the font preview for EL MOLACO please? The current font preview doesn't show the "L" alternate. Thank you
Rodolphe said
Ok 
Hi i uploaded new font last month "Amarieta" but i just found out that the multilingual is not correct (some part are missing). What should i do, resubmit it or wait for the approval? thanks
Rodolphe said
This is not possible again, because at dafont the kerning doesn't work between the alternate S and the a (when typing them manually)
https://www.dafont.com/saveya.font?text=%26%2357414%3Baveya&psize=l
... but what you can do is to make a special glyph with what you'd like to be displayed (with automatic ligatures)
Many authors do that, for example https://www.dafont.com/fr/yes-free.charmap
as you can see he designed the preview in the last glyph (U+E000) which is automatically displayed at dafont
PS. We validate this kind of thing only when it is not misleading for the users (when the separated glyphs exist alone, like in this font < and > for example)
https://www.dafont.com/saveya.font?text=%26%2357414%3Baveya&psize=l
... but what you can do is to make a special glyph with what you'd like to be displayed (with automatic ligatures)
Many authors do that, for example https://www.dafont.com/fr/yes-free.charmap
as you can see he designed the preview in the last glyph (U+E000) which is automatically displayed at dafont
PS. We validate this kind of thing only when it is not misleading for the users (when the separated glyphs exist alone, like in this font < and > for example)
Hi thank you for the advice, i already update the file for Saveya and EL MOLACO, and also update file & link for Ahganirya & La Gagliane font to be directed to my website. I am waiting them to be published, once again thank you for your help really appreciate it
Rodolphe said
It's the old preview that you had in cache, press CTRL+F5
hi sorry to reaching you out again, thank you for approving my fonts but i have same issue again on my new font Saveya, if you dont mind could you change the font preview to be similar to my image preview please? i really appreciate your help https://www.dafont.com/saveya.font
Rodolphe said
It's the old preview that you had in cache, press CTRL+F5
thank you for your help, it works
Rodolphe said
I don't understand, what's the problem with Qarkine (the preview is like on your image)
apologize for the confusion, the difference is mine using "k" as alternate and dafont preview using"ki" as ligature https://drive.google.com/file/d/1724RUcT82QbywmBGRyk8Kb9ZvJtWixS3/view?usp=sharing
Rodolphe said
For El Molaco we can't because the kerning doesn't work here... https://www.dafont.com/fr/el-molaco.font?text=El+Mo%26%23xe043%3Baco
so sad, but that's fine just change qarkine font please. thank you.
Rodolphe said
Ok
and El Molaco font, thank you so much for your help wish i could change by my self https://www.dafont.com/el-molaco.font https://www.dafont.com/qarkine.font
Rodolphe said
PS. The way we put them online is not at all in a chronological order
I thought it was based on the upload date, understood. And more thing could you do me a favor by changing the Qarkine preview font to be similar to my Qarkine image font? so much appreciate for your help
Rodolphe said
Ok
(press CTRL+F5 to make a hard-refresh and see the difference, otherwise your browser may display the old image of its cache for a while)
(press CTRL+F5 to make a hard-refresh and see the difference, otherwise your browser may display the old image of its cache for a while)
Thank you, but may I know how about my other fonts that I uploaded before them such as ahganirya,qarkine,qe laurenty,raligur,cerkiymo,mary goods, la qatrie and royale & caikes are they still under review or rejected? once again thank you
Dear Dafont, thank you for approving my font Okaluera but could you change the font preview to be similar to my preview image? https://www.dafont.com/okaluera.font
metaphasebrothel said
The old school way that I set ascenders and descenders:
For the glyph frame which has the highest ascender, and the one with the lowest descender, I move the top and bottom bearings to the highest and lowest positions, then I create a tiny contour in the upper or lower corner where that X Axis position intersects with the Y Axis position for the right or left side bearing. I save the project file, then delete the tiny contours, and save again. To me, that's easier than calculating a numeric value.
For the glyph frame which has the highest ascender, and the one with the lowest descender, I move the top and bottom bearings to the highest and lowest positions, then I create a tiny contour in the upper or lower corner where that X Axis position intersects with the Y Axis position for the right or left side bearing. I save the project file, then delete the tiny contours, and save again. To me, that's easier than calculating a numeric value.
Thanks for the advice, really appreciate it!
Plotomad said
hishand studio said
incorrect ascender/descender settings
Hi dafont my font Dolce & Amyara was rejected because you said "incorrect ascender/descender settings" I have checked it few times but i can't find the problem you mentioned, i don't see my font is cropped and nothing problem with the ascender/descender. Could you tell me where the problem exactly is? thanks
Hi dafont my font Dolce & Amyara was rejected because you said "incorrect ascender/descender settings" I have checked it few times but i can't find the problem you mentioned, i don't see my font is cropped and nothing problem with the ascender/descender. Could you tell me where the problem exactly is? thanks
Hello, I have no relation to dafont, but try checking in notepad / ms word
thank you! already solved.
Rodolphe said
They should be online at next update (this week)
thank you so much for your help
Rodolphe said
Ok, deleted from the pending submissions (it hadn't been reviewed yet)
Hi how about my fonts le atallier,bulgatry,marde sauve,oleragie, and dolce & amyara? it has already been almost 1.5 years and i don't hear any update except dolce & amyara
Hi dafont my font Dolce & Amyara was rejected because you said "incorrect ascender/descender settings" I have checked it few times but i can't find the problem you mentioned, i don't see my font is cropped and nothing problem with the ascender/descender. Could you tell me where the problem exactly is? thanks
All times are CEST. The time is now 13:23
