English 
Français 
Español 
Deutsch 
Italiano 
Português 
Forum
38 posts
Posts di hishand studio
Rodolphe ha detto 
Ok 
Hi i uploaded new font last month "Amarieta" but i just found out that the multilingual is not correct (some part are missing). What should i do, resubmit it or wait for the approval? thanks
Rodolphe ha detto
This is not possible again, because at dafont the kerning doesn't work between the alternate S and the a (when typing them manually)
https://www.dafont.com/saveya.font?text=%26%2357414%3Baveya&psize=l
... but what you can do is to make a special glyph with what you'd like to be displayed (with automatic ligatures)
Many authors do that, for example https://www.dafont.com/fr/yes-free.charmap
as you can see he designed the preview in the last glyph (U+E000) which is automatically displayed at dafont
PS. We validate this kind of thing only when it is not misleading for the users (when the separated glyphs exist alone, like in this font < and > for example)
https://www.dafont.com/saveya.font?text=%26%2357414%3Baveya&psize=l
... but what you can do is to make a special glyph with what you'd like to be displayed (with automatic ligatures)
Many authors do that, for example https://www.dafont.com/fr/yes-free.charmap
as you can see he designed the preview in the last glyph (U+E000) which is automatically displayed at dafont
PS. We validate this kind of thing only when it is not misleading for the users (when the separated glyphs exist alone, like in this font < and > for example)
Hi thank you for the advice, i already update the file for Saveya and EL MOLACO, and also update file & link for Ahganirya & La Gagliane font to be directed to my website. I am waiting them to be published, once again thank you for your help really appreciate it
Rodolphe ha detto
It's the old preview that you had in cache, press CTRL+F5
hi sorry to reaching you out again, thank you for approving my fonts but i have same issue again on my new font Saveya, if you dont mind could you change the font preview to be similar to my image preview please? i really appreciate your help https://www.dafont.com/saveya.font
Rodolphe ha detto
It's the old preview that you had in cache, press CTRL+F5
thank you for your help, it works
Rodolphe ha detto
I don't understand, what's the problem with Qarkine (the preview is like on your image)
apologize for the confusion, the difference is mine using "k" as alternate and dafont preview using"ki" as ligature https://drive.google.com/file/d/1724RUcT82QbywmBGRyk8Kb9ZvJtWixS3/view?usp=sharing
Rodolphe ha detto
For El Molaco we can't because the kerning doesn't work here... https://www.dafont.com/fr/el-molaco.font?text=El+Mo%26%23xe043%3Baco
so sad, but that's fine just change qarkine font please. thank you.
Rodolphe ha detto
Ok
and El Molaco font, thank you so much for your help wish i could change by my self https://www.dafont.com/el-molaco.font https://www.dafont.com/qarkine.font
Rodolphe ha detto
PS. The way we put them online is not at all in a chronological order
I thought it was based on the upload date, understood. And more thing could you do me a favor by changing the Qarkine preview font to be similar to my Qarkine image font? so much appreciate for your help
Rodolphe ha detto
Ok
(press CTRL+F5 to make a hard-refresh and see the difference, otherwise your browser may display the old image of its cache for a while)
(press CTRL+F5 to make a hard-refresh and see the difference, otherwise your browser may display the old image of its cache for a while)
Thank you, but may I know how about my other fonts that I uploaded before them such as ahganirya,qarkine,qe laurenty,raligur,cerkiymo,mary goods, la qatrie and royale & caikes are they still under review or rejected? once again thank you
Dear Dafont, thank you for approving my font Okaluera but could you change the font preview to be similar to my preview image? https://www.dafont.com/okaluera.font
metaphasebrothel ha detto
The old school way that I set ascenders and descenders:
For the glyph frame which has the highest ascender, and the one with the lowest descender, I move the top and bottom bearings to the highest and lowest positions, then I create a tiny contour in the upper or lower corner where that X Axis position intersects with the Y Axis position for the right or left side bearing. I save the project file, then delete the tiny contours, and save again. To me, that's easier than calculating a numeric value.
For the glyph frame which has the highest ascender, and the one with the lowest descender, I move the top and bottom bearings to the highest and lowest positions, then I create a tiny contour in the upper or lower corner where that X Axis position intersects with the Y Axis position for the right or left side bearing. I save the project file, then delete the tiny contours, and save again. To me, that's easier than calculating a numeric value.
Thanks for the advice, really appreciate it!
Plotomad ha detto
hishand studio ha detto
incorrect ascender/descender settings
Hi dafont my font Dolce & Amyara was rejected because you said "incorrect ascender/descender settings" I have checked it few times but i can't find the problem you mentioned, i don't see my font is cropped and nothing problem with the ascender/descender. Could you tell me where the problem exactly is? thanks
Hi dafont my font Dolce & Amyara was rejected because you said "incorrect ascender/descender settings" I have checked it few times but i can't find the problem you mentioned, i don't see my font is cropped and nothing problem with the ascender/descender. Could you tell me where the problem exactly is? thanks
Hello, I have no relation to dafont, but try checking in notepad / ms word
thank you! already solved.
Rodolphe ha detto
They should be online at next update (this week)
thank you so much for your help
Rodolphe ha detto
Ok, deleted from the pending submissions (it hadn't been reviewed yet)
Hi how about my fonts le atallier,bulgatry,marde sauve,oleragie, and dolce & amyara? it has already been almost 1.5 years and i don't hear any update except dolce & amyara
Forum: Discussioni generali
26/03/2024 alle 08:05 [post iniziale] incorrect ascender/descender settings
Hi dafont my font Dolce & Amyara was rejected because you said "incorrect ascender/descender settings" I have checked it few times but i can't find the problem you mentioned, i don't see my font is cropped and nothing problem with the ascender/descender. Could you tell me where the problem exactly is? thanks
Forum: Discussioni generali
20/03/2024 alle 01:06 [risposta] How do I submit regular, italic and bold at once?
marty666 ha detto
you're welcome 
hi, are you dafont admin?
Forum: Discussioni generali
12/03/2024 alle 00:45 [risposta] How to submit a font and accept by dafont?
Thanks dafont for approving my font Qrada but how about my font bulgatry which is i uploaded before Qrada font?
Forum: Discussioni generali
22/02/2024 alle 13:43 [risposta] How to submit a font and accept by dafont?
hishand studio ha detto
Hi Dafont, I have submitted font called Dolce & Amyara and rejected and I fixed it and resubmitted it, may i know how long it takes to be approved? and also there is one font called oleragie uploaded before dolce & amyara but I don't get any news is it approved or rejected?
also 2 more fonts called Qrada and Bulgatry, they were uploaded end of 2022 and early 2023
Forum: Discussioni generali
22/02/2024 alle 13:39 [risposta] How to submit a font and accept by dafont?
Hi Dafont, I have submitted font called Dolce & Amyara and rejected and I fixed it and resubmitted it, may i know how long it takes to be approved? and also there is one font called oleragie uploaded before dolce & amyara but I don't get any news is it approved or rejected?
Hi i want to ask, if the font is rejected after review and then resubmitted after fixed it, will the font take time to be reviewed same period as before? which is 12 months or more? thank you
Fuso orario: CEST. Ora sono le 16:58
